965
display bgp network
Syntax display bgp network
View Any view
Parameters None
Description Use the
display bgp network command to display routing information
advertised with the network command.
Examples # Display routing information that has been advertised.
<Sysname> display bgp network
BGP Local Router ID is 10.1.4.2.
Local AS Number is 400.
Network Mask Route-policy Short-cut
100.1.2.0 255.255.255.0
100.1.1.0 255.255.255.0 Short-cut
Configured hold timer value Holdtime interval
Keepalive timer value Keepalive interval
Minimum time between advertisement
runs
Minimum time between advertisement runs
Peer Preferred Value Preferred value of the routes from the peer
No routing policy is configured No routing policy is configured for the peer
Members Detailed information of the members in the peer
group
Peer IPv4 address of the peer
V BGP version running on peers
AS AS number of the peers
MsgRcvd Number of messages received
MsgSent Number of messages sent
OutQ Number of messages to be sent
PrefRcv Number of prefixes received
Up/Down The lasting time of a session/the lasting time of
present state (when no session is established)
State State machine of peer
Table 215 Description on the fields of the display bgp group command
Field Description
Table 216 Description on the fields of the display bgp network command
Field Description
BGP Local Router ID BGP Local Router ID
Local AS Number Local AS Number
Network Network address
