1845
120
PORT PRIORITY TRUST MODE
CONFIGURATION COMMANDS
display qos trust interface
Syntax display qos trust interface [ interface-type interface-number ]
View Any view
Parameters interface-type interface-number: Specifies an interface by its type and number.
Description Use the
display qos trust interface command to display the information about
the port priority trust mode currently configured.
If no interface is specified, the port priority trust mode of all interfaces will be
displayed.
Examples # Display the information about the port priority trust mode currently configured.
<Sysname> display qos trust interface ethernet 1/0
Interface: Ethernet1/0
Port priority information
Port priority :4
qos trust
Syntax qos trust dot1p
undo qos trust
View L2 module Ethernet interface view/port group view
Parameters dot1p: Specifies to trust 802.1p priority carried with a packet, and perform
priority mapping using this priority.
Table 489 Description on the fields of the display qos trust interface command
Field Description
Interface Interface name, consisting of interface type and interface number
Port priority Port priority
