715
display dhcp server tree
Syntax display dhcp server tree { all | pool [ pool-name ]}
View Any view
Parameter all: Displays the tree organization information of all DHCP address pools.
pool [ pool-name ]: Displays the tree organization information of a specified
address pool. The pool name is a string of 1 to 35 characters. If no pool name is
specified, the tree organization information of all address pools will be displayed.
Description Use the
display dhcp server tree command to display the tree organization
information of DHCP address pool(s).
Example # Display the tree organization information of all DHCP address pools.
<Sysname> display dhcp server tree all
Global pool:
Pool name: 0
network 20.1.1.0 mask 255.255.255.0
Sibling node:1
option 2 ip-address 1.1.1.1
expired100
Pool name: 1
static-bind ip-address 10.10.1.2 mask 255.0.0.0
static-bind mac-address 00e0-00fc-0001
Manual The number of static bindings
Expire The number of expired bindings
BOOTP Request The number of DHCP requests sent from DHCP clients to the
DHCP server, including:
■ DHCPDISCOVER
■ DHCPREQUEST
■ DHCPDECLINE
■ DHCPRELEASE
■ DHCPINFORM
■ BOOTPREQUEST
BOOTP Reply The number of DHCP replies sent from the DHCP server to DHCP
clients, including:
■ DHCPOFFER
■ DHCPACK
■ DHCPNAK
■ BOOTPREPLY
Bad Messages The number of erroneous messages
Table 129 Description on fields of the display dhcp server statistics command
Field Description
