1515
1024 S2/0 2 0 POP NORMAL ----
1 Record(s) Found
display mpls interface
Syntax display mpls interface [ interface-type interface-number ] [ verbose ]
View Any view
Parameter interface-type interface-number: Specifies an interface by its type and number.
verbose: Displays detailed information.
Description Use the
display mpls interface command to display information about a
specified or all interfaces with MPLS enabled.
Related command: display mpls statistics interface.
Example # Display information about all interfaces with MPLS enabled.
<Sysname> display mpls interface
Interface Status TE Attr LSP Count CRLSP Count
Eth1/0 Up En 0 0
Eth1/1 Up En 0 0
# Display detailed information about MPLS-enabled interface Ethernet 1/0.
<Sysname> display mpls interface ethernet 1/0 verbose
No : 1
Interface : Eth1/0
Status : Down
TE Attribute : Disable
LSPCount : 0
CR-LSPCount : 0
FRR : Disabled
Table 367 Description on the fields of the display mpls ilm command
Field Description
Inlabel Incoming label
In-Interface Incoming interface
Token NHLFE entry index
VRF-Index VRF index
Oper Operation type
LSP-Type LSP type
Swap-Label Label for swapping
Table 368 Description on the fields of the display mpls interface command
Field Description
No Sequence number
Interface Name of the interface
