A SERVICE OF

logo

1069
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] isis peer-ip-ignore
isis enable
Syntax isis silent
undo isis silent
View Interface view
Parameters None
Description Use the
isis silent command to disable the interface from sending and receiving
IS-IS hello packets.
Use the
undo isis silent command to restore the default.
By default, an interface is not disabled from sending and receiving hello packets.
n
The feature is not supported on the loopback interface.
Examples # Disable Serial 2/0 from sending and receiving hello packets.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] isis silent
isis small-hello
Syntax isis small-hello
undo isis small-hello
View Interface view
Parameters None
Description Use the
isis small-hello command to configure the interface to send small Hello
packets without padding field.
Use the
undo isis small-hello command to disable the feature.
An interface sends standard Hello packets by default.
n
This command is not available in loopback interface view.