844 CHAPTER 65: IPV6 BASICS CONFIGURATION COMMANDS
dns server ipv6
Syntax dns server ipv6 ipv6-address [ interface-type interface-number ]
undo dns server ipv6 ipv6-address [ interface-type interface-number ]
View System view
Parameter ipv6-address: IPv6 address of a DNS server.
interface-type interface-number: Specifies an interface. When the IPv6 address of
the DNS server is a link-local address, this argument must be specified.
Description Use the
dns server ipv6 command to configure an IPv6 address for a DNS server.
Use the undo dns server ipv6 command to remove the configured DNS server.
By default, no DNS server is configured.
Example # Configure the IPv6 address 2002::1 for a DNS server.
<Sysname> system-view
[Sysname] dns server ipv6 2002::1
ipv6
Syntax ipv6
undo ipv6
View System view
Parameter None
shorter than header Total number of UDP packets whose total length is less
than specified by the packet header
data length larger than packet Total number of packets whose data length exceeds
that specified by the packet header
unicast(no socket on port) Total number of unicast packets without any socket
received on a port
broadcast/multicast(no socket on
port)
Total number of broadcast/multicast packets without
any socket received on a port
not delivered, input socket full Number of packets not handled because of the receive
buffer being full
input packet missing pcb cache Number of packets failing to match the PCB cache
Table 182 Description on fields of the display udp ipv6 statistics command
Field Description
