1479
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000] rule permit source ff7e:140:20::101 64
[Sysname-acl6-basic-2000] quit
[Sysname] pim ipv6
[Sysname-pim6] embedded-rp 2000
hello-option dr-priority (IPv6 PIM view)
Syntax hello-option dr-priority priority
undo hello-option dr-priority
View IPv6 PIM view
Parameter priority: Router priority for DR election, in the range of 0 to 4294967295. A larger
value of this argument means a higher priority.
Description Use the
hello-option dr-priority command to configure the global value of the
router priority for DR election.
Use the
undo hello-option dr-priority command to restore the default setting.
By default, the router priority for DR election is 1.
Related command: pim ipv6 hello-option dr-priority.
Example # Set the router priority for DR election to 3.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option dr-priority 3
hello-option holdtime (IPv6 PIM view)
Syntax hello-option holdtime interval
undo hello-option holdtime
View IPv6 PIM view
Parameter interval: IPv6 PIM neighbor timeout time in seconds, with an effective range of 1
to 65,535.
Description Use the
hello-option holdtime command to configure the IPv6 PIM neighbor
timeout time.
Use the
undo hello-option holdtime command to restore the default setting.
