48
ARP SOURCE SUPPRESSION
CONFIGURATION COMMANDS
arp source-suppression enable
Syntax arp source-suppression enable
undo arp source-suppression enable
View System view
Parameter None
Description Use the
arp source-suppression enable command to enable the ARP source
suppression function.
Use the
undo arp source-suppression enable command to disable the
function.
By default, the ARP source suppression function is disabled.
Related command: display arp source-suppression.
Example # Enable the ARP source suppression function.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] arp source-suppression enable
arp source-suppression limit
Syntax arp source-suppression limit limit-value
undo arp source-suppression limit
View System view
Parameter limit-value: Specifies the maximum number of packets with the same source IP
address but unresolvable destination IP addresses that a port can receive in five
seconds. It ranges from 2 to 1,024.
