1075
is-name map
Syntax is-name map sys-id map-sys-name
undo is-name map sys-id
View IS-IS view
Parameters sys-id: System ID or a pseudonode ID of a remote IS.
map-sys-name: Specifies a name for the remote IS, a string of 1 to 64 characters.
Description Use the
is-name map command to map a name to a remote IS. Each remote IS
system ID corresponds to only one name.
Use the
undo is-name map command to remove the configuration.
By default, no name is configured for a remote IS.
Examples # Map the name RUTB to the remote IS 0000.0000.0041.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
is-snmp-traps enable
Syntax is-snmp-traps enable
undo is-snmp-traps
View IS-IS view
Parameters None
Description Use the
is-snmp-traps enable command to enable the SNMP Trap function of
IS-IS.
Use the
undo is-snmp-traps command to disable this function.
SNMP Trap is enabled by default.
Examples # Enable SNMP Trap.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-snmp-traps enable
