1127
Examples # Display OSPF request list information.
<Sysname> display ospf request-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Request List
The Router’s Neighbor is Router ID 2.2.2.2 Address 10.1.1.2
Interface 10.1.1.1 Area 0.0.0.0
Request list:
Type LinkState ID AdvRouter Sequence Age
Router 2.2.2.2 1.1.1.1 80000004 1
Network 192.168.0.1 1.1.1.1 80000003 1
Sum-Net 192.168.1.0 1.1.1.1 80000002 2
display ospf retrans-queue
Syntax display ospf [ process-id ] retrans-queue [ interface-type interface-number ]
[ neighbor-id ]
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
interface-type interface-number: Specifies an interface.
neighbor-id: Neighbor’s router ID.
Description Use the
display ospf retrans-queue command to display retransmit list
information.
If no OSPF process is specified, retransmit list information of all OSPF processes is
displayed.
Examples # Display OSPF retransmit list information.
<Sysname> display ospf retrans-queue
OSPF Process 1 with Router ID 1.1.1.1
OSPF Retransmit List
Table 274 Description on the fields of the display ospf request queue command
Field Description
The Router’s Neighbor is Router ID Neighbor router ID
Address Neighbor interface IP address
Interface Local interface IP address
Area Area ID
Request list Request list information
Type LSA type
LinkState ID Link state ID
AdvRouter Router ID of the advertising router
Sequence LSA sequence number
Age LSA age time
