1049
# Display the configuration information of IS-IS mesh-group.
[Sysname-Serial2/1] display isis mesh-group
Mesh Group information for ISIS(1)
----------------------------------------------------------------------
Interface Status
Serial2/0 100
Serial2/1 100
display isis name-table
Syntax display isis name-table [ process-id | vpn-instance vpn-instance-name ]
View Any view
Parameters process-id: IS-IS process ID, in the range of 1 to 65535.
vpn-instance-name: VPN instance name, in the range of 1 to 31 characters.
Description Use the
display isis name-table command to display the host name-to-system
ID mapping table.
Examples # Configure a name for the local IS-IS system.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] is-name RUTA
# Configure a static mapping for the remote IS-IS system (0000.0000.0041).
[Sysname-isis-1] is-name map 0000.0000.0041 RUTB
# Display the IS-IS host name-to-system ID mapping table.
[Sysname-isis-1] display isis name-table
Name table information for ISIS(1)
---------------------------------------------------------------
System ID Hostname Type
6789.0000.0001 RUTA DYNAMIC
0000.0000.0041 RUTB STATIC
display isis peer
Syntax display isis peer [ verbose ] [ process-id | vpn-instance vpn-instance-name ]
Table 238 Description on the fields of the display isis name-table command
Field Description
System ID System ID
Hostname Hostname name of the system ID
Type Mapping type of system ID to host name (static or dynamic)
