1416 CHAPTER 90: PIM CONFIGURATION COMMANDS
Use the undo pim holdtime join-prune command to restore the default
setting.
By default, the join/prune timeout time is 210 seconds.
Related command: holdtime assert (PIM view), pim holdtime assert, and holdtime join-prune
(PIM view).
Example # Set the join/prune timeout time to 280 seconds on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim holdtime join-prune 280
pim require-genid
Syntax pim require-genid
undo pim require-genid
View Interface view
Parameter None
Description Use the
pim require-genid command enable rejection of hello messages
without Generation_ID.
Use the
undo pim require-genid command to restore the default
configuration.
By default, hello messages without Generation_ID are accepted.
Example # Enable Ethernet1/0 to reject hello messages without Generation_ID.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim require-genid
pim sm
Syntax pim sm
undo pim sm
View Interface view
Parameter None
Description Use the
pim sm command to enable PIM-SM.
