1417
Use the undo pim sm command to disable PIM-SM.
By default, PIM-SM is disabled.
Related command: pim dm.
Example # Enable PIM-SM on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim sm
pim state-refresh-capable
Syntax pim state-refresh-capable
undo pim state-refresh-capable
View Interface view
Parameter None
Description Use the
pim state-refresh-capable command to enable the state fresh feature
on the interface.
Use the
undo pim state-refresh-capable command to disable the state fresh
feature.
By default, the state refresh feature is enabled.
Related command: state-refresh-interval (PIM view), state-refresh-rate-limit (PIM view), and
state-refresh-ttl (PIM view).
Example # Disable state refresh on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] undo pim state-refresh-capable
pim timer graft-retry
Syntax pim timer graft-retry interval
undo pim timer graft-retry
View Interface view
Parameter interval: Graft retry period in seconds, with an effective range of 1 to 65,535.
