1177
Examples # Configure an additional metric of 12 for RIP routes sent on Ethernet1/0.
<Sysname> system-view
[Sysname] interface ethernet1/0
[Sysname-Ethernet1/0] rip metricout 12
rip mib-binding
Syntax rip mib-binding process-id
undo rip mib-binding
View System view
Parameters process-id: RIP process number, in the range of 1 to 65535.
Description Use the
rip mib-binding command to bind MIB operations with a specified RIP
process.
Use the
undo rip mib-binding command to restore the default.
By default, MIB operations are bound to the RIP process with the smallest process
ID.
Examples # Configure RIP 100 to accept SNMP requests.
<Sysname> system-view
[Sysname] rip mib-binding 100
# Restore the default.
[Sysname] undo rip mib-binding
rip output
Syntax rip output
undo rip output
View Interface view
Parameters None
Description Use the
rip output command to enable the interface to send RIP messages.
Use the
undo rip output command to disable the interface from sending RIP
messages.
Sending RIP messages is enabled on an interface by default.
