1029
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 100::2
22::22/128,
*Sep 4 16:17:20:708 2006 Sysname RM/6/RMDEBUG:
BGP_IPV6.: Recv UPDATE from peer 100::2 with following destinations :
Update message length : 78
Local Pref : 100
MED : 0
Origin : Incomplete
AS Path :
Next Hop : 100::2
100::/64,
// Update messages of IPv6 address family
debugging bgp update l2vpn
Syntax debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive | send ]
[ verbose ]
undo debugging bgp update l2vpn [ peer { ipv4-address | group-name } ] [ receive |
send ] [ verbose ]
View User view
Default Level 1: Monitor level
Parameters peer { ipv4-address | group-name }: Enables/disables BGP L2VPN Update message
debugging for the specified peer/peer group.
receive: Enables/disables the debugging for received BGP packets.
send: Enables/disables the debugging for sent BGP packets.
verbose: Displays detailed debugging information.
Description Use the
debugging bgp update l2vpn command to enable debugging for BGP
L2VPN Update messages.
Use the
undo debugging bgp update l2vpn command to disable debugging
for BGP L2VPN Update messages.
By default, this debugging is disabled.
Enabling debugging may affect system performance; therefore, use this command
only when necessary and disable debugging once the debugging operation is
complete.
