1866 CHAPTER 124: DAR CONFIGURATION COMMANDS
display dar protocol
Syntax display dar protocol { all | protocol-name }
View Any view
Parameters all: Displays information about all protocols.
protocol-name: Displays information about specified protocols, in the same range
with the protocol-name defined in the dar protocol command.
Description Use the
display dar protocol command to display configuration information
about the DAR protocol.
The TCP/UDP port numbers are displayed for the static port protocols and general
application layer protocols.
Examples # Display information about all protocols.
<Sysname> display dar protocol all
Protocol TCP/UDP Port
-------------- -------- -----------
bgp tcp 179
udp 179
bittorrent tcp range 6881 6889
citrix tcp 1494
udp 1604
cuseeme tcp 7648 7649
udp 7648 7649 24032
dhcp udp 67 68
dns tcp 53
udp 53
exchange tcp 135
fasttrack tcp 1214
finger tcp 79
ftp tcp 21
gnutella tcp 5634 6355 range 6346 6349
gopher tcp 70
udp 70
h323 tcp 1300 1718 1719 1720 range 11000 11999
udp 1300 1718 1719 1720 11720
http tcp 80
imap tcp 143 220
udp 143 220
irc tcp 194
udp 194
kerberos tcp 88 749
udp 88 749
l2tp udp 1701
ldap tcp 389
udp 389
mgcp tcp 2427 2428 2727
udp 2427 2727
napster tcp 6699 8875 8888 7777 6700 6666 6677 6688 4444
