2463
Description Use the modem auto-answer command to set the answering mode to
auto-answer.
Use the
undo modem auto-answer command to restore the default, or
manual answer.
n
This command takes effect on the AUX port and other asynchronous interfaces
only, and cannot be applied to the Console port.
Example # Set the answering mode to auto-answer.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem auto-answer
modem timer answer
Syntax modem timer answer time
undo modem timer answer
View User interface view
Parameter time: Timeout time in the range 1 to 60 seconds.
Description Use the
modem timer answer command to set the timeout interval spent
waiting for the carrier signal after the off-hook action when setting up an
incoming call connection.
Use the
undo modem timer answer command to restore the default, or 30
seconds.
n
This command takes effect on the AUX port and other asynchronous interfaces
only, and cannot be applied to the Console port.
Example # Set the timeout interval to 50 seconds.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] modem timer answer 50
parity
Syntax parity { even | mark | none | odd | space }
undo parity
View User interface view
Parameter even: Even parity check.
