901
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] bind vpn-instance vpn1
data protect router-unix
Syntax data protect router-unix
undo data protect router-unix
View Terminal template view
Parameters None
Description Use the
data protect router-unix command to enable data encryption between
the router and the FEP.
Use the
undo data protect command to restore the default.
By default, data encryption is disabled between the router and the FEP.
In terminal access, you can configure whether to encrypt the data exchanged
between the router and the FEP. The supported encryption algorithm is AES
(advanced encryption standard) and the supported key length is 128-bit.
Example # Enable the data encryption between the router and the FEP.
<Sysname> system-view
[Sysname] rta template abc
[Sysname-rta-template-abc] data protect router-unix
data read block
Syntax data read block
undo data read block
View Terminal template view
Parameters None
Description Use the
data read block command to enable data read blocking.
Use the
undo data read block command to restore the default.
By default, data read blocking is disabled.
Note that, if data read blocking is enabled, when the router fails to send data from
the terminal, the router stops receiving data from the terminal until the data is
sent successfully.
