1886 CHAPTER 125: FR QOS CONFIGURATION COMMANDS
When the router serves as DCE for switching, the FIFO queue length of DLCI can
be set if FRTS has been applied to DLCI.
Related commands: fr class.
Examples # Set the FIFO queue of the FR class named test1 to hold 80 packets at most.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fifo queue-length 80
fr class
Syntax fr class class-name
undo fr class class-name
View System view
Parameters class-name: FR class name, a string of 1 to 30 characters.
Description Use the
fr class command to create a FR class and enter FR class view.
Use the undo fr class command to delete a specified FR class.
By default, no FR class is created.
Only after associating a FR class with an interface or virtual circuit and enabling the
FR QoS function on the corresponding interface, can the set FR class parameter
take effect.
When a FR class is deleted, the association between all interfaces or DLCIs and the
FR class will be released.
Related commands: fr-class.
Examples # Create a FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1]
fr congestion-threshold
Syntax fr congestion-threshold { de | ecn } queue-percentage
undo fr congestion-threshold { de | ecn }
View Frame relay interface view, MFR interface view
