2176 CHAPTER 142: SSH2.0 CONFIGURATION COMMANDS
Example # Display the source IP address of the SFTP client.
<Sysname> display sftp client source
The source IP address you specified is 192.168.0.1
display ssh client source
Syntax display ssh client source
View Any view
Parameter None
Description Use the
display ssh client source command to display the source IP address or
source interface currently set for the SSH client.
If neither source IP address nor source interface is specified for the SSH client,
“You didn’t specify the source” will be displayed.
Related command: ssh client source.
Example # Display the source IP address of the SSH client.
<Sysname> display ssh client source
The source IP address you specified is 192.168.0.1
display ssh server
Syntax display ssh server { status | session }
View Any view
Parameter status: Displays the status information of the SSH server.
session: Displays the session information of the SSH server.
Description Use the
display ssh server command to display the status information or
session information of an SSH server.
Related command: ssh server authentication-retries, ssh server rekey-interval, ssh server
authentication-timeout, ssh server enable, and ssh server
compatible-ssh1x enable.
Example # Display the status information of the SSH server.
<Sysname> display ssh server status
SSH Server: Disable
SSH version : 1.99
SSH authentication-timeout : 60 second(s)
