1653
display ccc
Syntax display ccc [ ccc-name ccc-name | type { local | remote }]
View Any view
Parameter ccc-name: CCC connection name, a string of 1 to 20 characters.
type: Specifies the type of the CCC connections.
local: Specifies local CCC connections.
remote: Specifies remote CCC connections.
Description Use the
display ccc command to display information about CCC connections.
If you do not specify the connection name or type, this command displays
information about all CCC connections.
Example # Display information about CCC connection c1.
<Sysname> display ccc ccc-name c1
***Name : c1
Type : remote
State : down
Intf : Serial2/0 (up)
In-label : 100
Out-label : 200
Nexthop : 20.1.1.1
# Display information about all local CCC connections.
<Sysname> display ccc type local
***Name : c2
Type : local
State : up
Intf1 : Serial2/0 (up)
Intf2 : Serial2/1 (up)
# Display information about all CCC connections.
<Sysname> display ccc
Total ccc vc : 1
Local ccc vc : 0, 0 up
as-path AS-PATH of the route
label base Label base
label range Label range
layer-2 mtu Layer 2 MTU
encap type Encapsulation type
Table 426 Fields of display bgp l2vpn route-distinguisher ce-id label-offset
Field Description
