1538 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
n
■ For an ingress, no statistics is collected in the incoming direction and the start
time and end time in the InSegment part of the command output are both 0.
■ Similarly, for an egress, no statistics is collected in the outgoing direction and
the start time and end time in the OutSegment part of the command output
are both 0.
du-readvertise
Syntax du-readvertise
undo du-readvertise
View MPLS LDP view/MPLS LDP VPN instance view
Parameter None
Description Use the
du-readvertise command to enable label readvertisement for DU mode.
Use the undo du-readvertise command to restore the default.
By default, label readvertisement is enabled in DU mode.
Example # Enable DU mode label readvertisement for the public network LDP.
<Sysname> system-view
[Sysname] mpls ldp
[Sysname-mpls-ldp] du-readvertise
# Enable DU mode label readvertisement for LDP instance named vpn1.
<Sysname> system-view
[Sysname] mpls ldp vpn-instance vpn1
[Sysname-mpls-ldp-vpn-instance-vpn1] du-readvertise
du-readvertise timer
Syntax du-readvertise timer value
undo du-readvertise timer
View MPLS LDP view/MPLS LDP VPN instance view
Parameter value: Label readvertisement interval in seconds. It ranges from 1 to 65,535.
Description Use the
du-readvertise timer command to set the interval for label
readvertisement in DU mode.
Use the
undo du-readvertise timer command to restore the default.
