1627
undo mpls te max-reservable-bandwidth
View Interface view
Parameter bandwidth-value: Maximum reservable bandwidth for RSVP traffic, in the range 1
to 32000000 kbps (global pool bandwidth).
bc1 value: Reservable bandwidth in kbps on the interface, in the range 1 to
bandwidth-value (subpool bandwidth).
Description Use the
mpls te max-reservable-bandwidth command to configure the
maximum reservable bandwidth.
Use the
undo mpls te max-reservable-bandwidth command to remove the
configuration.
The bandwidth in this command is configured only for MPLS traffic.
Example # On interface Ethernet 1/0 set maximum reservable bandwidth for MPLS TE to
1158 kbps, and the reservable BC1 bandwidth to 200 kbps.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls te max-reservable-bandwidth 1158 bc1 200
mpls te metric
Syntax mpls te metric value
undo mpls te metric
View Interface view
Parameter value: TE metric of the link, in the range 0 to 4294967295.
Description Use the
mpls te metric command to assign a TE metric to the link.
Use the
undo mpls te metric command to restore the default.
By default, the link uses its IGP metric as its TE metric.
Related command: mpls te path metric-type.
Example # Assign a TE metric of 20 to the link on interface Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] mpls te metric 20
