480 CHAPTER 27: LINK AGGREGATION CONFIGURATION COMMANDS
Use the undo link-aggregation group description command to remove the
name of the specified link aggregation group.
Related command: display link-aggregation verbose.
Example # Name link aggregation group 22 as abc.
<Sysname> system-view
[Sysname] link-aggregation group 22 description abc
link-aggregation group mode
Syntax link-aggregation group agg-id mode { manual | static }
undo link-aggregation group agg-id
View System view
Parameter agg-id: Link aggregation group ID, in the range 1 to 144.
manual: Creates a manual link aggregation group.
static: Creates a static LACP link aggregation group.
Description Use the
link-aggregation group mode command to create a link aggregation
group.
Use the
undo link-aggregation group command to remove a link aggregation
group.
Note that aggregation groups currently referenced by modules cannot be
removed.
Related command: display link-aggregation summary.
Example # Create manual link aggregation group 22.
<Sysname> system-view
[Sysname] link-aggregation group 22 mode manual
port link-aggregation group
Syntax port link-aggregation group agg-id
undo port link-aggregation group
View Ethernet interface view
Parameter agg-id: Link aggregation group ID, in the range 1 to 144.
