1551
mpls ldp remote-peer
Syntax mpls ldp remote-peer remote-peer-name
undo mpls ldp remote-peer remote-peer-name
View System view
Parameter remote-peer-name: Name of the remote peer, a case-insensitive string of 1 to 32
characters.
Description Use the
mpls ldp remote-peer command to create a remote peer entity and
enter MPLS LDP remote peer view.
Use the
undo mpls ldp remote-peer command to remove a remote peer entity.
Related command: remote-ip.
Example # Create a remote peer entity named BJI.
<Sysname> System-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]
mpls ldp timer hello-hold
Syntax mpls ldp timer hello-hold value
undo mpls ldp timer hello-hold
View Interface view/MPLS LDP remote peer view
Parameter value: Length of time for the Hello timer, in the range 1 to 65,535 seconds.
Description Use the
mpls ldp timer hello-hold command to set the Hello timers.
Use the
undo mpls ldp timer hello-hold command to restore the defaults.
In interface view, you configure the link Hello timer; in MPLS LDP remote peer
view, you configure the targeted Hello timer.
By default, the value of the link Hello timer is 15 seconds, while that of the
targeted Hello timer is 45 seconds.
n
Changing the values of the Hello timers does not affect any existing session.
Related command: mpls ldp (system view), mpls ldp (interface view).
