1759
display l2tp tunnel
Syntax display l2tp tunnel
View Any view
Parameter None
Description Use the
display l2tp tunnel command to display information about L2TP
tunnels.
Example # Display information about L2TP tunnels.
<Sysname> display l2tp tunnel
Total tunnel = 1
LocalTID RemoteTID RemoteAddress Port Sessions RemoteName
2 2284 11.1.1.1 1701 1 lns
interface virtual-template
Syntax interface virtual-template virtual-template-number
undo interface virtual-template virtual-template-number
View System view
Parameter virtual-template-number: Serial number for identifying the virtual interface
template, in the range of 0 to 1023.
Description Use the
interface virtual-template command to create a virtual interface
template and enter its view.
Use the
undo interface virtual-template command to remove a virtual
interface template.
By default, no virtual interface template exists.
Table 471 Description on the fields of the display l2tp tunnel command
Field Description
Total tunnel Number of active tunnels
LocalTID Unique ID of the tunnel at the local end
RemoteTID Unique ID of the tunnel at the remote end
RemoteAddress IP address of the peer
Port Port number of the peer
Sessions Number of sessions within the tunnel
RemoteName Name of the tunnel at the peer
