1879
View Frame relay class view
Parameters cql cql-index: Group number of Custom Queuing, ranging from 1 to 16.
Description Use the
cq command to set the FR virtual circuit queuing to Custom Queuing
(CQ).
Use the
undo cq command to restore the FR virtual circuit queuing to FIFO.
By default, the virtual circuit queuing type is FIFO.
If you use this command repeatedly on the same FR, the new configuration will
overwrite the old one.
Related commands: wfq, pq, fr pvc-pq.
Examples # Apply the group10 of Custom Queuing to the FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] cq cql 10
display fr class-map
Syntax display fr class-map { fr-class class-name | interface interface-type
interface-number }
View Any view
Parameters class-name: FR class name, a string of 1 to 30 characters.
interface-type interface-number: Specifies an interface by its type and number.
Description Use the
display fr class-map command to view information on FR class to
interface map, including DLCIs of interfaces, subinterfaces on the interfaces and
their DLCIs.
When configuring the command, you can specify a FR class name or main
interface, but not a subinterface.
Examples # Display information on the map of FR class to the interface Serial1/0.
<Sysname> display fr class-map interface Serial 1/0
Serial1/0
fr-class ts
Serial1/0.1
fr-class ts
fr dlci 100 Serial1/0
fr-class ts
fr dlci 200 Serial1/0.1
fr-class ts
