353
Use the undo max-pdu command to restore the default maximum LLC2 PDU
size.
By default, the maximum LLC2 PDU size is 1,493 bytes.
Example # Set the maximum LLC2 PDU size to 1,000 bytes on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-pdu 1000
llc2 max-send-queue
Syntax llc2 max-send-queue length
undo llc2 max-send-queue
View Ethernet interface view
Parameter length: The length of the LLC2 output queue, in the range of 20 to 200.
Description Use the
llc2 max-send-queue command to configure the length of the LLC2
output queue.
Use the
undo llc2 max-send-queue command to restore the default setting.
By default, the length of the LLC2 output queue is 50.
Example # Set the length of the LLC2 output queue to 30 on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] llc2 max-send-queue 30
llc2 max-transmission
Syntax llc2 max-transmission retries
undo llc2 max-transmission
View Ethernet interface view
Parameter retries: LLC2 transmission retries, in the range of 1 to 255.
Description Use the
llc2 max-transmission command to configure the number of LLC2
transmission retries, namely the maximum number of times an information frame
is retransmitted before an acknowledgment frame is received from the peer.
Use the
undo llc2 max-transmission command to restore the default setting.
