2212 CHAPTER 144: SSL CONFIGURATION COMMANDS
RSA_RC4_128_SHA
RSA_DES_CBC_SHA
RSA_3DES_EDE_CBC_SHA
RSA_AES_128_CBC_SHA
RSA_AES_256_CBC_SHA
Handshake Timeout: 3600
Close-mode: wait disabled
Session Timeout: 3600
Session Cachesize: 500
Client-verify: disabled
handshake timeout
Syntax handshake timeout time
undo handshake timeout
View SSL server policy view
Parameter time: Handshake timeout time, in the range 180 to 7,200 seconds.
Description Use the
handshake timeout command to set the handshake timeout time for
an SSL server policy.
Use the
undo handshake timeout command to restore the default.
By default, the handshake timeout time is 3,600 seconds.
Example # Set the handshake timeout time of SSL server policy policy1 to 3,000 seconds.
<Sysname> system-view
[Sysname] ssl server-policy policy1
[Sysname-ssl-server-policy-policy1] handshake timeout 3000
pki-domain
Syntax pki-domain domain-name
Table 581 Description on the fields of the display ssl server-policy command
Field Description
SSL Server Policy SSL server policy name
PKI Domain PKI domain to which the SSL server policy belongs
Ciphersuite Cipher suites supported by the SSL server policy
Handshake Timeout Handshake timeout time of the SSL server policy
Close-mode Close mode of the SSL server policy
Session Timeout Session timeout time of the SSL server policy
Session Cachesize Maximum number of buffered sessions of the SSL server policy
Client-verify Whether client authentication is enabled
