A SERVICE OF

logo

2415
display history-command
Syntax display history-command
View Any view
Parameter None
Description Use the
display history-command command to display commands saved in
the history buffer.
The system will save validated history commands performed last in current user
view to the history buffer, which can save up to ten commands by default. You can
use the history-command max-size command to set the size of the history
buffer. Refer to “history-command max-size” on page 2460 for related
configuration.
Example # Display validated history commands in current user view (the display information
varies with configuration).
<Sysname> display history-command
display history-command
system-view
vlan 2
quit
display hotkey
Syntax display hotkey
View Any view
Parameter None
Description Use the
display hotkey command to display hotkey information.
Example # Display hotkey information.
<Sysname> display hotkey
----------------- HOTKEY -----------------
=Defined hotkeys=
Hotkeys Command
CTRL_G display current-configuration
CTRL_L display ip routing-table
CTRL_O undo debug all
=Undefined hotkeys=
Hotkeys Command
CTRL_T NULL
CTRL_U NULL