1311
display ripng database
Syntax display ripng process-id database
View Any view
Parameters process-id: RIPng process number, in the range of 1 to 65535.
Description Use the
display ripng database command to display all active routes in the
RIPng advertising database, which are sent in normal RIPng update messages.
Examples # Display the active routes in the database of RIPng process 100.
<Sysname> display ripng 100 database
2001:7B::2:2A1:5DE/64,
cost 4, Imported
1:13::/120,
cost 4, Imported
1:32::/120,
cost 4, Imported
1:33::/120,
cost 4, Imported
100::/32,
via FE80::200:5EFF:FE04:3302, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:1::/64,
via FE80::200:5EFF:FE04:B601, cost 2
3FFE:C00:C18:2::/64,
via FE80::200:5EFF:FE04:B602, cost 2
3FFE:C00:C18:3::/64,
via FE80::200:5EFF:FE04:B601, cost 2
4000:1::/64,
via FE80::200:5EFF:FE04:3302, cost 2
4000:2::/64,
via FE80::200:5EFF:FE04:3302, cost 2
Number of periodic updates sent Number of periodic updates sent
Number of trigger updates sent Number of triggered updates sent
Table 316 Description on the fields of the display ripng command
Field Description
Table 317 Description on fields of the display ripng database command
Field Description
2001:7B::2:2A1:5DE/64 IPv6 destination address/prefix length
via Next hop IPv6 address
cost Route metric value
Imported Routes learnt from other routing protocols
