566 CHAPTER 37: ISDN CONFIGURATION COMMANDS
display isdn call-record
Syntax display isdn call-record [ interface interface-type interface-number ]
View Any view
Parameter interface-type interface-number: Specifies an interface by its type and number.
Description Use the
display isdn call-record command to view the information of ISDN call
history. If no interface is specified, the system displays all ISDN call history.
Executing this command will display information of the calls activated up to now,
but the number of retained entries is limited to 100.
Example # Display the information of ISDN call history.
<Sysname> display isdn call-record
Call Calling Called Start Stop Seconds
Type Number Number Time Time Used
In 10660016 10660016 03-07-05 11:23:09 - 0
In 10660022 10660022 03-07-05 11:23:09 - 0
CCIndex Index of the call at the CC layer
State Current state of the layer 3 link of the BRI interface. It can
be one of the following:
NULL
CALL_INITIATED
OVERLAP_SENDING
OUTGOING_CALL_PROCEEDING
CALL_DELIVERED
CALL_PRESENT
CALL_RECEIVED
CONNECT_REQUEST
INCOMING_CALL_PROCEEDING
ACTIVE
DISCONNECT_REQUEST
DISCONNECT_INDICATION
SUSPEND_REQUEST
RESUME_REQUEST
RELEASE_REQUEST
OVERLAP_RECEIVING
CES Connection endpoint suffix
Channel ISDN B channel map for the call
Calling_Num[:Sub]: Calling number: calling sub-address.
Called_Num[:Sub] Called number: called sub-address
Table 95 Description on the fields of the display isdn call-info command
Field Description
