42
PORT ISOLATION CONFIGURATION
COMMANDS
display port-isolate group
Syntax display port-isolate group
View Any view
Parameter None
Description Use the
display port-isolate group command to display information of the
default isolation group (Group 1).
Example # Display information of the default isolation group.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: NO
Group ID: 1
Ethernet1/1 Ethernet1/2
port-isolate enable
Syntax port-isolate enable
undo port-isolate enable
View Ethernet interface view, port group view
Parameter None
Table 116 Description on the output information of the display port-isolate group
command
Field Description
Port-isolate group information Information of the isolation group
Uplink port support Whether support uplink port
Group ID Isolation group number
Ethernet1/1 Ethernet1/2 Ordinary ports (non-uplink ports) in the isolation
group
