2164 CHAPTER 141: IKE CONFIGURATION COMMANDS
ike peer (system view)
Syntax ike peer peer-name
undo ike peer peer-name
View System view
Parameter peer-name: IKE peer name, a string of 1 to 15 characters.
Description Use the
ike peer command to create an IKE peer and enter IKE peer view.
Use the
undo ike peer command to delete an IKE peer.
Example # Create an IKE peer named peer1 and enter IKE peer view.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1]
ike proposal
Syntax ike proposal proposal-number
undo ike proposal proposal-number
View System view
Parameter proposal-number: IKE proposal number, in the range 1 to 100. It also stands for
the priority, with a smaller value meaning a higher priority. During an IKE
negotiation, the system matches IKE proposals by proposal number, starting from
the smallest one.
Description Use the ike proposal command to create an IKE proposal and enter IKE proposal
view.
Use the
undo ike proposal command to delete an IKE proposal.
The system provides a default IKE proposal, which has the lowest priority and uses
these settings.
■ Encryption algorithm: DES-CBC;
■ Authentication algorithm: HMAC-SHA1;
■ Authentication method: Pre-shared Key;
■ DH group: MODP_768;
■ SA lifetime: 86, 400 seconds.
Related command: display ike proposal.
