2410 CHAPTER 162: BASIC CONFIGURATION COMMANDS
Example # Set the command level of the interface command to 0.
<Sysname> system-view
[Sysname] command-privilege level 0 view system interface
configure-user count
Syntax configure-user count number
undo configure-user count
View System view
Parameter number: Number of users, the value range varies with devices.
Description Use the
configure-user count command to configure the number of users
allowed to enter system view at the same time.
Use the
undo configure-user count command to restore the default
configuration.
Two users are allowed to configure in system view by default.
Related command: display configure-user.
n
■ The support for the command varies with devices.
■ When multiple users enter system view to configure certain attribute, only the
last configuration applies.
■ When the number of users has already reached the limit, other users can not
enter system view.
Example # Configure the limit of users as 4.
<Sysname> system-view
[Sysname] configure-user count 4
display clipboard
Syntax display clipboard
View Any view
Parameter None
Manage (3) FTP, XMODEM, TFTP, file system operation commands
Table 622 Default level of the commands
Command level Commands
