1117
display ospf cumulative
Syntax display ospf [ process-id ] cumulative
View Any view
Parameters process-id: OSPF process ID, in the range 1 to 65535.
Description Use the
display ospf cumulative command to display OSPF statistics.
Use of this command is helpful for troubleshooting.
Examples # Display OSPF statistics.
<Sysname> display ospf cumulative
OSPF Process 1 with Router ID 2.2.2.2
Cumulations
IO Statistics
Type Input Output
Hello 61 122
DB Description 2 3
Link-State Req 1 1
Link-State Update 3 3
Link-State Ack 3 2
LSAs originated by this router
Router: 4
Network: 0
Sum-Net: 0
Area Area ID in the IP address format
Authtype Authentication type of the area: Non-authentication,
simple authentication, or MD5 authentication
Area flag The type of the area
SPF scheduled Count SPF calculation count in the OSPF area
Interface IP address of the interface
Cost Interface cost
State Interface state
Type Interface network type
MTU Interface MTU
Priority Router priority
Designated Router The Designated Router
Backup Designated Router The Backup Designated Router
Timers Intervals of timers: hello, dead, poll, retransmit, and
transmit delay
Transmit Delay LSA transmit delay on the interface
Table 264 Description on the fields of the display ospf brief command
Field Description
