1766 CHAPTER 104: L2TP CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel avp-hidden
tunnel flow-control
Syntax tunnel flow-control
undo tunnel flow-control
View L2TP group view
Parameter None
Description Use the
tunnel flow-control command to enable the L2TP tunnel flow control
function.
Use the
undo tunnel flow-control command to disable the L2TP tunnel flow
control function.
By default, the L2TP tunnel flow control function is disabled.
Example # Enable the L2TP tunnel flow control function.
<Sysname> system-view
[Sysname] l2tp-group 1
[Sysname-l2tp1] tunnel flow-control
tunnel name
Syntax tunnel name name
undo tunnel name
View L2TP group view
Parameter name: Name for the tunnel at the local end, a string of 1 to 30 characters.
Description Use the
tunnel name command to specify the name of a tunnel at the local end.
Use the undo tunnel name command to restore the default.
By default, a tunnel takes the system name of the device as its name at the local
end.
Related command: sysname on page 2423.
Example # Specify the local name for a tunnel as itsme.
