2264 CHAPTER 148: DEVICE MANAGEMENT COMMANDS
Description Use the temperature-alarm enable command to enable the temperature
alarm function.
Use the
undo temperature-alarm enable command to disable the
temperature alarm function.
By default, the temperature alarm function is enabled.
Example # Enable the temperature alarm function.
<Sysname> system-view
[Sysname] temperature-alarm enable
temperature-limit
Syntax temperature-limit slot-number lower-value upper-value
undo temperature-limit slot-number
View System view
Parameter slot-number: Slot number. The value range varies with devices.
lower-value: Lower temperature limit in Celsius degrees, in the range 0 to 30.
upper-value: Upper temperature limit in Celsius degrees, in the range 40 to 90.
Description Use the
temperature-limit command to set the temperature alarm threshold on
a card.
Use the
undo temperature-limit command to restore the temperature alarm
threshold to the default.
By default, the lower value and the upper value of the temperature alarm
threshold is 5 and 60 respectively.
Example # Set the lower temperature limit on card 0 to 10 Celsius degrees and the upper
temperature limit to 75 Celsius degrees.
<Sysname> system-view
[Sysname] temperature-limit 0 10 75
Setting temperature limit succeeded.
