1414 CHAPTER 90: PIM CONFIGURATION COMMANDS
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option lan-delay 200
pim hello-option neighbor-tracking
Syntax pim hello-option neighbor-tracking
undo pim hello-option neighbor-tracking
View Interface view
Parameter None
Description Use the
pim hello-option neighbor-tracking command to disable join
suppression, namely enable neighbor tracking, on the current interface.
Use the
undo pim hello-option neighbor-tracking command to enable join
suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related command: hello-option neighbor-tracking (PIM view).
Example # Disable join suppression on Ethernet 1/0.
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pim hello-option neighbor-tracking
pim hello-option override-interval
Syntax pim hello-option override-interval interval
undo pim hello-option override-interval
View Interface view
Parameter interval: Prune override interval in milliseconds, with an effective range of 1 to
65,535.
Description Use the
pim hello-option override-interval command to configure the prune
override interval on the current interface.
Use the
undo pim hello-option override-interval command to restore the
default setting.
By default, the prune override interval is 2,500 milliseconds.
