1737
View System view
Parameter all: Specifies all configured VAM clients.
name client-name: Specifies an existing VAM client. The client-name argument
indicates the name of the VAM client and is a case-insensitive string of 1 to 31
characters. Valid characters are A to Z, a to z, 0 to 9, and “.”.
Description Use the vam client enable command to enable all VAM clients or a specified
VAM client.
Use the
undo vam client enable command to disable all VAM clients or a
specified VAM client.
By default, all VAM clients are disabled.
Related command: vam client name and client enable.
Example # Enable the VAM client named spoke.
<Sysname> system-view
[Sysname] vam client enable name spoke
vam client name
Syntax vam client name client-name
undo vam client name client-name
View System view
Parameter client-name: Name of a VAM client, a string of 1 to 31 case-insensitive characters.
Valid characters are A through Z, a through z, 0 through 9, hyphen (-), and dot (.).
Description Use the
vam client command to create a VAM client and enter VAM client view,
or enter VAM client view directly if the VAM client already exists.
Use the
undo vam client command to delete the specified VAM client.
By default, no VAM client is configured.
Note that you are unable to directly delete a VAM client that is already applied on
an interface.
Example # Create a VAM client named abc.
<Sysname> system-view
[Sysname] vam client name abc
[Sysname-vam-client-name-abc]
