2523
170
ACSEI CLIENT CONFIGURATION
COMMANDS
n
■ Multiple kinds of ACSEI clients have been developed at present. Different
ACSEI clients need different configuration. The following commands are
available for the ACSEI client running on an OAP module.
■ The following commands can be executed in any directory of the Linux system.
You can use the oap connect slot command in user view of the device to
enter the Linux system of the OAP module. For description on the oap
connect slot command, refer to “oap connect slot” on page 2507.
acsei-client debug disable
Syntax acsei-client debug disable
View Any directory of the Linux system
Parameters None
Description Use the
acsei-client debug disable command to disable debugging for ACSEI
client.
By default, debugging for ACSEI client is disabled.
Examples # The OAP module locates in slot 6. Disable debugging for ACSEI client.
<Sysname> oap connect slot 6
Connected to OAP!
[root@localhost ~]# acsei-client debug disable
acsei-client debug enable
Syntax acsei-client debug enable
View Any directory of the Linux system
Parameters None
