163
INFORMATION CENTER
CONFIGURATION COMMANDS
display channel
Syntax display channel [ channel-number | channel-name ]
View Any view
Parameter channel-number: Displays information of the channel with a specified number,
where channel-number represents the channel number, in the range 0 to 9.
channel-name: Displays information of the channel with a specified name, where
channel-name represents the channel name, which could be a default name or
one that is defined by the user. The user needs to specify a channel name first
before using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
Description Use the
display channel command to display channel information.
If no channel is specified, information for all channels is displayed.
Example # Display information for channel 0.
<Sysname> display channel 0
channel number:0, channel name:console
MODU_ID NAME ENABLE LOG_LEVEL ENABLE TRAP_LEVEL ENABLE DEBUG_LEVEL
ffff0000 default Y warnings Y debugging Y debugging
Table 624 Information channels for different output directions
Output direction
Information channel
number Default channel name
Console 0 console
Monitor terminal 1 monitor
Log host 2 loghost
Trap buffer 3 trapbuffer
Log buffer 4 logbuffer
SNMP NMS 5 snmpagent
Log file 9 channel9
Table 625 Description on the fields of the display channel command
Field Description
channel number A specified channel number, in the range 0 to 9.
