739
Description Use the display dhcp relay security tracker command to display the interval
for refreshing dynamic bindings on the relay agent.
Example # Display the interval for refreshing dynamic bindings on the relay agent.
[Sysname] display dhcp relay security tracker
Current tracker interval : Auto
The interval is 10 seconds.
display dhcp relay server-group
Syntax display dhcp relay server-group { group-id | all }
View Any view
Parameter group-id: Displays the information of the specified DHCP server group numbered
from 0 to 19.
all: Displays the information of all DHCP server groups.
Description Use the
display dhcp relay server-group command to display the
configuration information of a specified or all DHCP server groups.
Example # Display IP addresses of DHCP servers in DHCP server group 1.
<Sysname> display dhcp relay server-group 1
No. Group IP
1 1.1.1.1
2 1.1.1.2
display dhcp relay statistics
Syntax display dhcp relay statistics [ server-group { group-id | all }]
View Any view
Parameter group-id: Specifies a server group number in the range of 0 to 19 about which to
display DHCP packet statistics.
all: Specifies all server groups about which to display DHCP packet statistics.
Information for each group will be displayed.
Table 134 Description on fields of the display dhcp relay server-group command
Field Description
No. Sequence number
Group IP IP address in the server group
