102
DVPN TUNNEL CONFIGURATION
COMMANDS
display dvpn session
Syntax display dvpn session { all | interface interface-type interface-number [ private-ip
ip-address ]}
View Any view
Parameter All: Displays information about all Spoke-Spoke and Spoke-Hub sessions
associated with the VAM client.
interface interface-type interface-number: Displays information about DVPN
sessions associated with the interface specified by interface-type and
interface-number. The interface must be of the type of tunnel.
private-ip ip-address: Specifies the private IP address of the peer VAM client.
Description Use the
display dvpn session to display information about the DVPN session
list.
Example # Display information about DVPN sessions associated with interface Tunnel0.
<Sysname> display dvpn session interface tunnel 0
Interface: Tunnel0 Total number: 2
Private IP: 10.0.0.21
Public IP: 28.1.1.21
Tunnel type: Hub-Spoke
State: SUCCESS
Holding time: 0h 15m 33s
Input: 277 packets, 66 data packets, 211 control packets
58 multicasts, 0 errors
Output: 279 packets, 103 data packets, 176 control packets
93 multicasts, 0 errors
