571
Parameter caller-number: Caller number that an incoming ISDN call can carry, which is a
character string of 1 to 24 characters.
Description Use the isdn caller-number command to configure the range of the numbers
that the router can receive.
Use the
undo isdn caller-number command to delete the configured caller
number.
Example # Configure the router to receive only the incoming calls from the caller numbers
with 400.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0]isdn caller-number 400
isdn calling
Syntax isdn calling calling-number
undo isdn calling
View ISDN interface view
Parameter calling-number: Calling number.
Description Use the
isdn calling command to have the messages from a calling party to a
called party carry the calling number. This command mainly applies on BRI
interfaces. If a calling party has configured this command on its BRI interface, the
call party will be able to see the calling number by viewing the call history
information.
Use the
undo isdn calling command to delete calling number in the messages
that a calling party transmitted.
Example # Configure the message from a calling party to a called party on interface BRI 1/0
to carry calling number.
<Sysname> system-view
[Sysname] interface bri 1/0
[Sysname-Bri1/0] isdn calling 8060170
isdn check-called-number
Syntax isdn check-called-number check-index called-party-number [: subaddress ]
undo isdn check-called-number check-index
View ISDN interface view.
