1532 CHAPTER 95: MPLS BASICS CONFIGURATION COMMANDS
View Any view
Parameters token: NHLFE entry index. The value range varies by device.
include text: Specifies NHLFE entries including a specified string.
Description Use the
display mpls nhlfe command to display information about the NHLFE
table.
With the token argument not specified, the command displays information about
all NHLFE entries.
Examples # Display information about a specified NHLFE entry.
<Sysname> display mpls nhlfe 2
Out-Interface Token Oper Nexthop Deep Stack
----------------------------------------------------------------------
S2/0 2 PUSH 88.1.1.2 1 1024
1 Record(s) Found
# Display all NHLFE entries.
<Sysname> display mpls nhlfe
Out-Interface Token Oper Nexthop Deep Stack
----------------------------------------------------------------------
S2/0 2 PUSH 88.1.1.2 1 1024
1 Record(s) Found
display mpls route-state
Syntax display mpls route-state [ vpn-instance vpn-instance-name ] [ dest-addr
mask-length ]
View Any view
Parameter vpn-instance-name: Name of the VPN instance, a case-sensitive string of 1 to 31
characters.
dest-addr: Destination IP address.
mask-length: Length of the mask for the destination IP address, in the range 0 to
32.
Table 382 Description on the fields of the display mpls nhlfe command
Field Description
Out-Interface Outgoing interface
Token NHLFE entry index
Oper Operation type
Nexthop Next hop
Deep Depth of the MPLS label stack
Stack MPLS label
