1971
Related command: reset stop-accounting-buffer, radius scheme, display
stop-accounting-buffer.
Example # In RADIUS scheme radius1, enable the device to buffer the stop-accounting
requests getting no responses.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] stop-accounting-buffer enable
timer quiet (RADIUS scheme view)
Syntax timer quiet minutes
undo timer quiet
View RADIUS scheme view
Parameter minutes: Primary server quiet period, in minutes. It ranges from 1 to 255 and
defaults to 5.
Description Use the
timer quiet command to set the quiet timer for the primary server, that
is, the duration that the status of the primary server stays blocked before resuming
the active state.
Use the
undo timer quiet command to restore the default.
Related command: display radius scheme.
Example # Set the quiet timer for the primary server to 10 minutes.
<Sysname> system-view
[Sysname] radius scheme test1
[Sysname-radius-test1] timer quiet 10
timer realtime-accounting (RADIUS scheme view)
Syntax timer realtime-accounting minutes
undo timer realtime-accounting
View RADIUS scheme view
Parameter minutes: Real-time accounting interval in minutes, must be a multiple of 3 and in
the range 3 to 60, with the default value being 12.
Description Use the
timer realtime-accounting command to set the real-time accounting
interval.
