2162 CHAPTER 141: IKE CONFIGURATION COMMANDS
Description Use the id-type command to select the type of the ID in IKE negotiation.
Use the
undo id-type command to restore the default.
By default, the type of IP address is used in IKE negotiation.
Note that:
■ In main mode, only the ID type of IP address can be used in performing IKE
negotiation and creating an SA.
■ In aggressive mode, either type can be used.
Related command: ike local-name, remote-name, remote-address, local-address,
exchange-mode.
Example # Use the ID type of name in IKE negotiation.
<Sysname> system-view
[Sysname] ike peer peer1
[Sysname-ike-peer-peer1] id-type name
ike dpd
Syntax ike dpd dpd-name
undo ike dpd dpd-name
View System view
Parameter dpd-name: Name for the dead peer detection (DPD), a string of 1 to 15 characters.
Description Use the
ike dpd command to create a DPD and enter IKE DPD view.
Use the
undo ike dpd command to remove a DPD.
Example # Create a DPD named dpd2.
<Sysname> system-view
[Sysname] ike dpd dpd2
ike local-name
Syntax ike local-name name
undo ike local-name
View System view
