2601
are used to match the actual numbers in the received call packets to complete the
calls.
When configuring a POTS entity, use the match-template command to define
the number template to be bound to the local voice entity. When configuring a
VoIP entity, use the match-template command to define the number template on
the called side.
n
In E1 voice, “T”, “#”, and “*” are not supported currently.
Example # Specify 5557922 as a telephone number of voice entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] match-template 5557922
# Configure a match template for VoIP entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 010 voip
[Sysname-voice-dial-entity10] match-template 5557922
nlp-on
Syntax nlp-on
undo nlp-on
View Voice subscriber line view
Parameter None
Description Use the
nlp-on command to enable the EC nonlinear processing function on a
voice interface.
Use the
undo nlp-on command to disable the function.
By default, the EC nonlinear processing function is enabled.
n
■ This command takes effect only after the echo-canceller enable command is
configured.
■ Currently, only digital voice subscriber lines support the undo nlp-on
command, but analog voice subscriber lines do not.
Example # Disable the EC nonlinear processing function on voice interface.
<Sysname> system-view
[Sysname] voice-setup
