1941
local-user password-display-mode
Syntax local-user password-display-mode { auto | cipher-force }
undo local-user password-display-mode
View System view
Parameter auto: Displays the password of an accessing user based on the configuration of
the user by using the password command.
cipher-force: Displays the passwords of all accessing users in cipher text.
Description Use the
local-user password-display-mode command to set the password
display mode for all local users.
Use the
undo local-user password-display-mode command to restore the
default.
The default mode is auto.
With the cipher-force mode configured,
■ A local user password is always displayed in cipher text, regardless of the
configuration of the password command.
■ If you use the save command to save the configuration, all existing local user
passwords will still be displayed in cipher text after the device restarts, even if
you restore the display mode to auto.
Related command: display local-user, password.
Example # Specify to display the passwords of all accessing users in cipher text.
[Sysname] local-user password-display-mode cipher-force
password
Syntax password { cipher | simple } password
undo password
View Local user view
Parameter cipher: Specifies to display the password in cipher text.
simple: Specifies to display the password in simple text.
password: Password for the local user.
